Consumables cross-reference

Domino A/Ax-series fluids cross-reference

Domino A-Series (A100/A200/A300/A400) and Ax-Series (Ax150i/Ax350i/Ax550i) printers use a cartridge-based ink system: an ink cartridge plus a make-up (solvent) cartridge, with ink-reservoir cores on long-life configurations. Domino's own manuals are gated behind MyDomino, so the OEM part numbers below are assembled from aftermarket fluid vendors' published compatibility tables (CMS Ink, Needham Ink, SIC UK). Verify the ink type against the printer configuration (the printer rejects 'unknown ink' or 'incorrect ink type') and test on your substrate.

Fluid items and notes

ItemNotes
IC-899BKLow-odour MEK-free black ink cartridge (0.825 L), A100/A200/A300/A400 (CMS Ink ref 112.A899.123).
IC-445RDEgg-coding red ink cartridge (0.825 L) (CMS Ink ref 112.E445.323).
IC-207RDStandard MEK red ink cartridge (CMS Ink ref 112.M207.323).
IC-138BKBlack ink cartridge, 825 ml - vendor descriptions differ (ethanol vs MEK); confirm via SDS (Needham ref 06191; SIC lists 138BK).
IC-222BKBlack plastics ink, MEK, 825 ml (Needham ref 04541).
IC-223BKBlack cable-coding ink, MEK (Needham ref 04544).
MC- / IR- prefixesVendors distinguish make-up cartridges (MC-) and reservoir ink (IR-) from ink cartridges (IC-); normalising on the bare code loses this distinction - keep the prefix.
Domino A/Ax fault messages for fluids include 'Add ink cartridge', 'No ink', 'Add make-up cartridge', 'No make-up', 'Ink change due - replace ink reservoir' and 'Viscosity out of range'. OEM part numbers and prefixes (IC- ink cartridge, MC- make-up cartridge, IR- reservoir) are as published by aftermarket vendors; chemistry descriptions are marketing copy, not spec - always confirm solvent base with an SDS.

Aftermarket vendors

The full vendor list (25 companies) is in outreach/vendors.csv in the repo. Contact routes are per-vendor; use their public contact form or sales line.

FAQ

Are these aftermarket fluids official OEM products?

No. The OEM part numbers are facts from the manufacturer's numbering; the vendors listed publish their own compatible/replacement fluids. PackDesk does not sell fluids and is not affiliated with any manufacturer or vendor.

Do I have to switch to an aftermarket fluid?

No. The OEM ink/make-up is the reference. Aftermarket equivalents can reduce consumable cost, but you must verify chemistry, substrate compatibility, and any food-contact/retort requirements before switching.

How do I know which ink my printer needs?

The printer configuration stores the ink type; the machine will reject an 'unknown ink' or 'incorrect ink type'. Check the installed ink system and the manufacturer documentation for your exact model.