Videojet 1650 / 1650 UHS / 1550

Videojet E6097: Missed Print (PD Too Close To Printhead)

Videojet third-party source Checked 2026-11-21
Quick answer Videojet E6097 means A print was missed because the product detector is too close to the printhead..

What it means

A print was missed because the product detector is too close to the printhead..

This page is generated from a public source (see below). It is a starting point, not a substitute for the service manual for your exact model and serial number.

Likely causes

  • Product detector to printhead distance too short for the line parameters

What to check

  1. Check the printhead-to-detector distance and increase the gap or adjust the product
  2. Clear the warning or power-cycle if it will not clear

Parts and consumables

Parts

  • product detector
  • printhead

Consumables

  • Not listed in the source.

FAQ

What does Videojet E6097 mean?

Videojet E6097 (Missed Print (PD Too Close To Printhead)) means: A print was missed because the product detector is too close to the printhead.

What should I check first for Videojet E6097?

Start with: Check the printhead-to-detector distance and increase the gap or adjust the product. Then: Clear the warning or power-cycle if it will not clear.

When should I call a technician for Videojet E6097?

If the code returns after the checks above, or the printer develops a new fault, call a qualified technician.

Source: https://oeelab.com/videojet-printer-fault-codes — § E6097: Missed Print (PD Too Close To Printhead) “E6097: Missed Print (PD Too Close To Printhead)”. Provenance tier: third-party source, not verified against the manufacturer manual. Confidence: low. Diagnostic guidance only — always verify against the manual for your exact model.