Videojet 1650 / 1650 UHS / 1550

Videojet E6078: Suspected Head Heater Failure (Or Thermal Trip)

Videojet third-party source Checked 2026-11-21
Quick answer Videojet E6078 means The printer suspects the printhead heater has failed or its thermal trip has opened..
Safety. The heater plate can reach 70 C in a fault condition; do not touch it.

What it means

The printer suspects the printhead heater has failed or its thermal trip has opened..

This page is generated from a public source (see below). It is a starting point, not a substitute for the service manual for your exact model and serial number.

Likely causes

  • Failed printhead heater
  • Heater thermal trip opened

What to check

  1. Do not touch the heater plate (it can reach 70 C in a fault)
  2. Use the service manual or call a Videojet service engineer

Parts and consumables

Parts

  • printhead heater

Consumables

  • Not listed in the source.

FAQ

What does Videojet E6078 mean?

Videojet E6078 (Suspected Head Heater Failure (Or Thermal Trip)) means: The printer suspects the printhead heater has failed or its thermal trip has opened.

What should I check first for Videojet E6078?

Start with: Do not touch the heater plate (it can reach 70 C in a fault). Then: Use the service manual or call a Videojet service engineer.

When should I call a technician for Videojet E6078?

If the checks above do not clear the code, or the fault involves a board, pump, valve, heater, or EHT/HV component, stop and call a qualified technician. Do not keep a production line running on an unresolved fault.

Source: https://oeelab.com/videojet-printer-fault-codes — § E6078: Suspected Head Heater Failure (Or Thermal Trip) “E6078: Suspected Head Heater Failure (Or Thermal Trip)”. Provenance tier: third-party source, not verified against the manufacturer manual. Confidence: low. Diagnostic guidance only — always verify against the manual for your exact model.