Videojet 1650 / 1650 UHS / 1550

Videojet E6073: Overspeed

Videojet third-party source Checked 2026-11-21
Quick answer Videojet E6073 means Line speed is too fast for the current raster to give the required print width..

What it means

Line speed is too fast for the current raster to give the required print width..

This page is generated from a public source (see below). It is a starting point, not a substitute for the service manual for your exact model and serial number.

Likely causes

  • Line speed above the limit for the selected raster or font
  • Shaft encoder speed very high

What to check

  1. Check whether the print width is still acceptable
  2. Choose a raster suited to the line speed

Parts and consumables

Parts

  • shaft encoder

Consumables

  • Not listed in the source.

FAQ

What does Videojet E6073 mean?

Videojet E6073 (Overspeed) means: Line speed is too fast for the current raster to give the required print width.

What should I check first for Videojet E6073?

Start with: Check whether the print width is still acceptable. Then: Choose a raster suited to the line speed.

When should I call a technician for Videojet E6073?

If the code returns after the checks above, or the printer develops a new fault, call a qualified technician.

Source: https://oeelab.com/videojet-printer-fault-codes — § E6073: Overspeed “E6073: Overspeed”. Provenance tier: third-party source, not verified against the manufacturer manual. Confidence: low. Diagnostic guidance only — always verify against the manual for your exact model.