Videojet 1650 / 1650 UHS / 1550

Videojet E6049: Pressure Too Low

Videojet third-party source Checked 2026-11-21
Quick answer Videojet E6049 means Actual ink pressure is more than 0.2 bar below target..

What it means

Actual ink pressure is more than 0.2 bar below target..

This page is generated from a public source (see below). It is a starting point, not a substitute for the service manual for your exact model and serial number.

Likely causes

  • Ink pressure control or pump problem (service level)
  • Ink condition affecting pressure

What to check

  1. Check the print for lost/over-deflected drops and check jet alignment
  2. Use the service manual or call a Videojet engineer

Parts and consumables

Parts

  • ink pump

Consumables

  • ink

FAQ

What does Videojet E6049 mean?

Videojet E6049 (Pressure Too Low) means: Actual ink pressure is more than 0.2 bar below target.

What should I check first for Videojet E6049?

Start with: Check the print for lost/over-deflected drops and check jet alignment. Then: Use the service manual or call a Videojet engineer.

When should I call a technician for Videojet E6049?

If the checks above do not clear the code, or the fault involves a board, pump, valve, heater, or EHT/HV component, stop and call a qualified technician. Do not keep a production line running on an unresolved fault.

Source: https://oeelab.com/videojet-printer-fault-codes — § E6049: Pressure Too Low “E6049: Pressure Too Low”. Provenance tier: third-party source, not verified against the manufacturer manual. Confidence: low. Diagnostic guidance only — always verify against the manual for your exact model.