Videojet 1650 / 1650 UHS / 1550

Videojet E6047: Ink Viscosity Too Low

Videojet third-party source Checked 2026-11-21
Quick answer Videojet E6047 means The ink is too thin (pressure more than 0.1 bar below the calculated value)..

What it means

The ink is too thin (pressure more than 0.1 bar below the calculated value)..

This page is generated from a public source (see below). It is a starting point, not a substitute for the service manual for your exact model and serial number.

Likely causes

  • Too much make-up added, e.g. repeated start/stop cycles
  • Ink system fault

What to check

  1. Avoid repeated jet start/stop cycles that add make-up
  2. Use the service manual or call a Videojet service engineer

Parts and consumables

Parts

  • Not listed in the source.

Consumables

  • make-up fluid
  • ink

FAQ

What does Videojet E6047 mean?

Videojet E6047 (Ink Viscosity Too Low) means: The ink is too thin (pressure more than 0.1 bar below the calculated value).

What should I check first for Videojet E6047?

Start with: Avoid repeated jet start/stop cycles that add make-up. Then: Use the service manual or call a Videojet service engineer.

When should I call a technician for Videojet E6047?

If the code returns after the checks above, or the printer develops a new fault, call a qualified technician.

Source: https://oeelab.com/videojet-printer-fault-codes — § E6047: Ink Viscosity Too Low “E6047: Ink Viscosity Too Low”. Provenance tier: third-party source, not verified against the manufacturer manual. Confidence: low. Diagnostic guidance only — always verify against the manual for your exact model.