Videojet 1650 / 1650 UHS / 1550

Videojet E6046: Ink Viscosity Too High

Videojet third-party source Checked 2026-11-21
Quick answer Videojet E6046 means The ink is too thick (pressure more than 0.1 bar above the calculated value)..

What it means

The ink is too thick (pressure more than 0.1 bar above the calculated value)..

This page is generated from a public source (see below). It is a starting point, not a substitute for the service manual for your exact model and serial number.

Likely causes

  • Solvent lost from the ink and not replaced
  • Make-up cartridge empty or missing

What to check

  1. Check a make-up cartridge is fitted and not empty
  2. Use the service manual or call a Videojet engineer if it stays

Parts and consumables

Parts

  • make-up cartridge

Consumables

  • make-up fluid
  • ink

FAQ

What does Videojet E6046 mean?

Videojet E6046 (Ink Viscosity Too High) means: The ink is too thick (pressure more than 0.1 bar above the calculated value).

What should I check first for Videojet E6046?

Start with: Check a make-up cartridge is fitted and not empty. Then: Use the service manual or call a Videojet engineer if it stays.

When should I call a technician for Videojet E6046?

If the code returns after the checks above, or the printer develops a new fault, call a qualified technician.

Source: https://oeelab.com/videojet-printer-fault-codes — § E6046: Ink Viscosity Too High “E6046: Ink Viscosity Too High”. Provenance tier: third-party source, not verified against the manufacturer manual. Confidence: low. Diagnostic guidance only — always verify against the manual for your exact model.