Videojet 1650 / 1650 UHS / 1550
Videojet E6045: Phase Threshold Error
Quick answer
Videojet E6045 means The printer cannot get a phase profile even with the phase threshold at its minimum..
What it means
The printer cannot get a phase profile even with the phase threshold at its minimum..
This page is generated from a public source (see below). It is a starting point, not a substitute for the service manual for your exact model and serial number.
Likely causes
- Dirty printhead or poor break-up
- Phasing settings need a service check
What to check
- Clean and dry the printhead and check the jet
- Use the service manual or call a Videojet service engineer
Parts and consumables
Parts
- printhead
Consumables
- cleaning solution
FAQ
What does Videojet E6045 mean?
Videojet E6045 (Phase Threshold Error) means: The printer cannot get a phase profile even with the phase threshold at its minimum.
What should I check first for Videojet E6045?
Start with: Clean and dry the printhead and check the jet. Then: Use the service manual or call a Videojet service engineer.
When should I call a technician for Videojet E6045?
If the code returns after the checks above, or the printer develops a new fault, call a qualified technician.
Source: https://oeelab.com/videojet-printer-fault-codes — § E6045: Phase Threshold Error “E6045: Phase Threshold Error”.
Provenance tier: third-party source, not verified against the manufacturer manual. Confidence: low. Diagnostic guidance only — always verify against the manual for your exact model.