Videojet 1650 / 1650 UHS / 1550

Videojet E6044: Head Cover Removed

Videojet third-party source Checked 2026-11-21
Quick answer Videojet E6044 means The printer sees the printhead cover as not fitted..

What it means

The printer sees the printhead cover as not fitted..

This page is generated from a public source (see below). It is a starting point, not a substitute for the service manual for your exact model and serial number.

Likely causes

  • Printhead cover not seated
  • Printhead not slid fully into the sleeve
  • Magnet missing from sleeve end
  • Faulty cover switch

What to check

  1. Seat the cover completely
  2. Slide the printhead fully into the sleeve
  3. Check the sleeve magnet is present
  4. Call service if the cover switch is faulty

Parts and consumables

Parts

  • printhead cover
  • cover switch

Consumables

  • Not listed in the source.

FAQ

What does Videojet E6044 mean?

Videojet E6044 (Head Cover Removed) means: The printer sees the printhead cover as not fitted.

What should I check first for Videojet E6044?

Start with: Seat the cover completely. Then: Slide the printhead fully into the sleeve. Then: Check the sleeve magnet is present.

When should I call a technician for Videojet E6044?

If the code returns after the checks above, or the printer develops a new fault, call a qualified technician.

Source: https://oeelab.com/videojet-printer-fault-codes — § E6044: Head Cover Removed “E6044: Head Cover Removed”. Provenance tier: third-party source, not verified against the manufacturer manual. Confidence: low. Diagnostic guidance only — always verify against the manual for your exact model.