Videojet 1650 / 1650 UHS / 1550

Videojet E6042: TOF Too Low

Videojet third-party source Checked 2026-11-21
Quick answer Videojet E6042 means Measured jet velocity (time of flight) is more than 10% below target..

What it means

Measured jet velocity (time of flight) is more than 10% below target..

This page is generated from a public source (see below). It is a starting point, not a substitute for the service manual for your exact model and serial number.

Likely causes

  • Ink viscosity or pressure out of range
  • Partly blocked nozzle
  • Velocity control problem (service level)

What to check

  1. Check for other active viscosity or pressure warnings
  2. Use the service manual or call a Videojet engineer

Parts and consumables

Parts

  • nozzle

Consumables

  • ink

FAQ

What does Videojet E6042 mean?

Videojet E6042 (TOF Too Low) means: Measured jet velocity (time of flight) is more than 10% below target.

What should I check first for Videojet E6042?

Start with: Check for other active viscosity or pressure warnings. Then: Use the service manual or call a Videojet engineer.

When should I call a technician for Videojet E6042?

If the code returns after the checks above, or the printer develops a new fault, call a qualified technician.

Source: https://oeelab.com/videojet-printer-fault-codes — § E6042: TOF Too Low “E6042: TOF Too Low”. Provenance tier: third-party source, not verified against the manufacturer manual. Confidence: low. Diagnostic guidance only — always verify against the manual for your exact model.