Videojet 1650 / 1650 UHS / 1550
Videojet E6040: Head Temperature Too Low
Quick answer
Videojet E6040 means Measured printhead temperature is more than 3 C below target..
What it means
Measured printhead temperature is more than 3 C below target..
This page is generated from a public source (see below). It is a starting point, not a substitute for the service manual for your exact model and serial number.
Likely causes
- Printhead heater not working
- Cold drafts or surroundings at the printhead
What to check
- Check the area around the printhead for cold air flow
- Use the service manual or call a Videojet engineer
Parts and consumables
Parts
- printhead heater
Consumables
- Not listed in the source.
FAQ
What does Videojet E6040 mean?
Videojet E6040 (Head Temperature Too Low) means: Measured printhead temperature is more than 3 C below target.
What should I check first for Videojet E6040?
Start with: Check the area around the printhead for cold air flow. Then: Use the service manual or call a Videojet engineer.
When should I call a technician for Videojet E6040?
If the checks above do not clear the code, or the fault involves a board, pump, valve, heater, or EHT/HV component, stop and call a qualified technician. Do not keep a production line running on an unresolved fault.
Source: https://oeelab.com/videojet-printer-fault-codes — § E6040: Head Temperature Too Low “E6040: Head Temperature Too Low”.
Provenance tier: third-party source, not verified against the manufacturer manual. Confidence: low. Diagnostic guidance only — always verify against the manual for your exact model.