Videojet 1650 / 1650 UHS / 1550

Videojet E6039: Head Temperature Too High

Videojet third-party source Checked 2026-11-21
Quick answer Videojet E6039 means Measured printhead temperature is more than 3 C above target..

What it means

Measured printhead temperature is more than 3 C above target..

This page is generated from a public source (see below). It is a starting point, not a substitute for the service manual for your exact model and serial number.

Likely causes

  • Printhead heater control problem
  • Hot surroundings at the printhead

What to check

  1. Check the area around the printhead for heat sources
  2. Use the service manual or call a Videojet engineer

Parts and consumables

Parts

  • printhead heater

Consumables

  • Not listed in the source.

FAQ

What does Videojet E6039 mean?

Videojet E6039 (Head Temperature Too High) means: Measured printhead temperature is more than 3 C above target.

What should I check first for Videojet E6039?

Start with: Check the area around the printhead for heat sources. Then: Use the service manual or call a Videojet engineer.

When should I call a technician for Videojet E6039?

If the checks above do not clear the code, or the fault involves a board, pump, valve, heater, or EHT/HV component, stop and call a qualified technician. Do not keep a production line running on an unresolved fault.

Source: https://oeelab.com/videojet-printer-fault-codes — § E6039: Head Temperature Too High “E6039: Head Temperature Too High”. Provenance tier: third-party source, not verified against the manufacturer manual. Confidence: low. Diagnostic guidance only — always verify against the manual for your exact model.