Videojet 1650 / 1650 UHS / 1550

Videojet E6021: Initial Phasing Trim Failed

Videojet third-party source Checked 2026-11-21
Quick answer Videojet E6021 means The phasing trim at jet start-up failed because phase data could not be obtained..

What it means

The phasing trim at jet start-up failed because phase data could not be obtained..

This page is generated from a public source (see below). It is a starting point, not a substitute for the service manual for your exact model and serial number.

Likely causes

  • Partly blocked or dirty nozzle
  • Wet or dirty printhead

What to check

  1. Back-flush the nozzle
  2. Clean the printhead and dry it completely
  3. After two failed attempts, use the service manual or call a Videojet engineer

Parts and consumables

Parts

  • nozzle
  • printhead

Consumables

  • cleaning solution

FAQ

What does Videojet E6021 mean?

Videojet E6021 (Initial Phasing Trim Failed) means: The phasing trim at jet start-up failed because phase data could not be obtained.

What should I check first for Videojet E6021?

Start with: Back-flush the nozzle. Then: Clean the printhead and dry it completely. Then: After two failed attempts, use the service manual or call a Videojet engineer.

When should I call a technician for Videojet E6021?

If the code returns after the checks above, or the printer develops a new fault, call a qualified technician.

Source: https://oeelab.com/videojet-printer-fault-codes — § E6021: Initial Phasing Trim Failed “E6021: Initial Phasing Trim Failed”. Provenance tier: third-party source, not verified against the manufacturer manual. Confidence: low. Diagnostic guidance only — always verify against the manual for your exact model.