Videojet 1650 / 1650 UHS / 1550

Videojet E6015: Bad Nozzle

Videojet third-party source Checked 2026-11-21
Quick answer Videojet E6015 means The printer has detected a nozzle problem..

What it means

The printer has detected a nozzle problem..

This page is generated from a public source (see below). It is a starting point, not a substitute for the service manual for your exact model and serial number.

Likely causes

  • Nozzle not fitted correctly
  • Nozzle blocked or damaged
  • Ink in poor condition

What to check

  1. Shut down the jet
  2. Check the nozzle is fitted correctly
  3. Carry out a nozzle flush then restart
  4. Consider refreshing the ink if it persists

Parts and consumables

Parts

  • nozzle

Consumables

  • ink
  • cleaning solution

FAQ

What does Videojet E6015 mean?

Videojet E6015 (Bad Nozzle) means: The printer has detected a nozzle problem.

What should I check first for Videojet E6015?

Start with: Shut down the jet. Then: Check the nozzle is fitted correctly. Then: Carry out a nozzle flush then restart.

When should I call a technician for Videojet E6015?

If the code returns after the checks above, or the printer develops a new fault, call a qualified technician.

Source: https://oeelab.com/videojet-printer-fault-codes — § E6015: Bad Nozzle “E6015: Bad Nozzle”. Provenance tier: third-party source, not verified against the manufacturer manual. Confidence: low. Diagnostic guidance only — always verify against the manual for your exact model.