Videojet 1650 / 1650 UHS / 1550
Videojet E6011: Pump Fault
Quick answer
Videojet E6011 means The ink pump has a fault and is not delivering ink reliably to the printhead..
What it means
The ink pump has a fault and is not delivering ink reliably to the printhead..
This page is generated from a public source (see below). It is a starting point, not a substitute for the service manual for your exact model and serial number.
Likely causes
- Ink pump or pump drive failure (service level)
What to check
- Use the service manual or call a qualified Videojet service engineer
Parts and consumables
Parts
- ink pump
Consumables
- ink
FAQ
What does Videojet E6011 mean?
Videojet E6011 (Pump Fault) means: The ink pump has a fault and is not delivering ink reliably to the printhead.
What should I check first for Videojet E6011?
Start with: Use the service manual or call a qualified Videojet service engineer.
When should I call a technician for Videojet E6011?
If the checks above do not clear the code, or the fault involves a board, pump, valve, heater, or EHT/HV component, stop and call a qualified technician. Do not keep a production line running on an unresolved fault.
Source: https://oeelab.com/videojet-printer-fault-codes — § E6011: Pump Fault “E6011: Pump Fault”.
Provenance tier: third-party source, not verified against the manufacturer manual. Confidence: low. Diagnostic guidance only — always verify against the manual for your exact model.