Videojet 1650 / 1650 UHS / 1550

Videojet E6008: EHT/HV Trip

Videojet third-party source Checked 2026-11-21
Quick answer Videojet E6008 means The printer sensed arcing at the deflector plate (EHT leakage above the limit) and stopped printing..
Safety. EHT (extra-high tension) is present in the printhead. Stop the jet and switch off hazardous voltages before cleaning; let the printhead dry fully before restart.

What it means

The printer sensed arcing at the deflector plate (EHT leakage above the limit) and stopped printing..

This page is generated from a public source (see below). It is a starting point, not a substitute for the service manual for your exact model and serial number.

Likely causes

  • Ink build-up or wet ink on the deflector plate or charge electrode
  • Printhead not fully dry at jet start
  • Blocked nozzle or misaligned jet
  • EHT/HV calibration out of date

What to check

  1. Stop the jet and clean the deflector electrodes with the correct cleaning solution
  2. Let the printhead dry fully before restarting
  3. Back-flush the nozzle
  4. Calibrate EHT/HV if the trip returns

Parts and consumables

Parts

  • deflector plate
  • charge electrode
  • nozzle

Consumables

  • cleaning solution

FAQ

What does Videojet E6008 mean?

Videojet E6008 (EHT/HV Trip) means: The printer sensed arcing at the deflector plate (EHT leakage above the limit) and stopped printing.

What should I check first for Videojet E6008?

Start with: Stop the jet and clean the deflector electrodes with the correct cleaning solution. Then: Let the printhead dry fully before restarting. Then: Back-flush the nozzle.

When should I call a technician for Videojet E6008?

If the checks above do not clear the code, or the fault involves a board, pump, valve, heater, or EHT/HV component, stop and call a qualified technician. Do not keep a production line running on an unresolved fault.

Source: https://oeelab.com/videojet-printer-fault-codes — § E6008: EHT/HV Trip “E6008: EHT/HV Trip”. Provenance tier: third-party source, not verified against the manufacturer manual. Confidence: low. Diagnostic guidance only — always verify against the manual for your exact model.