Videojet 1650 / 1650 UHS / 1550

Videojet E6000: Printhead Absent

Videojet third-party source Checked 2026-11-21
Quick answer Videojet E6000 means Communication between the user interface and the control system board has been lost..

What it means

Communication between the user interface and the control system board has been lost..

This page is generated from a public source (see below). It is a starting point, not a substitute for the service manual for your exact model and serial number.

Likely causes

  • Communication link to the CSB lost
  • Communication settings wrong

What to check

  1. Power-cycle the printer and see if the fault clears
  2. Perform a Communications set-up if needed

Parts and consumables

Parts

  • control system board

Consumables

  • Not listed in the source.

FAQ

What does Videojet E6000 mean?

Videojet E6000 (Printhead Absent) means: Communication between the user interface and the control system board has been lost.

What should I check first for Videojet E6000?

Start with: Power-cycle the printer and see if the fault clears. Then: Perform a Communications set-up if needed.

When should I call a technician for Videojet E6000?

If the checks above do not clear the code, or the fault involves a board, pump, valve, heater, or EHT/HV component, stop and call a qualified technician. Do not keep a production line running on an unresolved fault.

Source: https://oeelab.com/videojet-printer-fault-codes — § E6000: Printhead Absent “E6000: Printhead Absent”. Provenance tier: third-party source, not verified against the manufacturer manual. Confidence: low. Diagnostic guidance only — always verify against the manual for your exact model.