Videojet 1580 / 1860 / 1880
Videojet E15150: Ink Viscosity Too Low
Quick answer
Videojet E15150 means The ink is too thin because too much make-up fluid has been added to the system..
What it means
The ink is too thin because too much make-up fluid has been added to the system..
This page is generated from a public source (see below). It is a starting point, not a substitute for the service manual for your exact model and serial number.
Likely causes
- Too much make-up added, e.g. repeated clean stops/starts or nozzle flushing
What to check
- Keep the jet running if possible so solvent can evaporate
- Avoid adding more make-up (no Clean Stop/Start or nozzle flushing)
Parts and consumables
Parts
- Not listed in the source.
Consumables
- make-up fluid
- ink
FAQ
What does Videojet E15150 mean?
Videojet E15150 (Ink Viscosity Too Low) means: The ink is too thin because too much make-up fluid has been added to the system.
What should I check first for Videojet E15150?
Start with: Keep the jet running if possible so solvent can evaporate. Then: Avoid adding more make-up (no Clean Stop/Start or nozzle flushing).
When should I call a technician for Videojet E15150?
If the code returns after the checks above, or the printer develops a new fault, call a qualified technician.
Source: https://cdn.pimber.ly/public/asset/raw/604204e33fc1d2001bbaeea6/d48fefc9/62b5db2d2d2f5f4727000086/E12907_1.pdf — p. 9-20 “(E15150) Ink Viscosity Too Low”.
Provenance tier: manual. Confidence: high. Diagnostic guidance only — always verify against the manual for your exact model.