Videojet 1580 / 1860 / 1880

Videojet E15054: Mixer Tank Level Sensor Error

Videojet manual Checked 2026-11-21
Quick answer Videojet E15054 means The printer has not received a valid response from the mixer tank level sensor..

What it means

The printer has not received a valid response from the mixer tank level sensor..

This page is generated from a public source (see below). It is a starting point, not a substitute for the service manual for your exact model and serial number.

Likely causes

  • Sensor unplugged or mis-wired
  • Bad sensor connector
  • Sensor failure
  • Bad IMB

What to check

  1. Switch off and confirm the sensor is plugged into the IMB

Parts and consumables

Parts

  • level sensor
  • ink management board

Consumables

  • ink

FAQ

What does Videojet E15054 mean?

Videojet E15054 (Mixer Tank Level Sensor Error) means: The printer has not received a valid response from the mixer tank level sensor.

What should I check first for Videojet E15054?

Start with: Switch off and confirm the sensor is plugged into the IMB.

When should I call a technician for Videojet E15054?

If the checks above do not clear the code, or the fault involves a board, pump, valve, heater, or EHT/HV component, stop and call a qualified technician. Do not keep a production line running on an unresolved fault.

Source: https://cdn.pimber.ly/public/asset/raw/604204e33fc1d2001bbaeea6/d48fefc9/62b5db2d2d2f5f4727000086/E12907_1.pdf — p. 9-15 “(E15054) Mixer Tank Level Sensor Error”. Provenance tier: manual. Confidence: high. Diagnostic guidance only — always verify against the manual for your exact model.