Videojet 1580 / 1860 / 1880
Videojet E15031: Modulation Driver Too Hot
Quick answer
Videojet E15031 means The modulation drive circuit has exceeded its maximum temperature..
What it means
The modulation drive circuit has exceeded its maximum temperature..
This page is generated from a public source (see below). It is a starting point, not a substitute for the service manual for your exact model and serial number.
Likely causes
- Defective print module or PCB
- Defective umbilical
- Defective main control board
What to check
- Contact your local Videojet Service representative
Parts and consumables
Parts
- print module
- main control board
- umbilical
Consumables
- Not listed in the source.
FAQ
What does Videojet E15031 mean?
Videojet E15031 (Modulation Driver Too Hot) means: The modulation drive circuit has exceeded its maximum temperature.
What should I check first for Videojet E15031?
Start with: Contact your local Videojet Service representative.
When should I call a technician for Videojet E15031?
If the checks above do not clear the code, or the fault involves a board, pump, valve, heater, or EHT/HV component, stop and call a qualified technician. Do not keep a production line running on an unresolved fault.
Source: https://cdn.pimber.ly/public/asset/raw/604204e33fc1d2001bbaeea6/d48fefc9/62b5db2d2d2f5f4727000086/E12907_1.pdf — p. 9-14 “(E15031) Modulation Driver Too Hot”.
Provenance tier: manual. Confidence: high. Diagnostic guidance only — always verify against the manual for your exact model.