Videojet 1580 / 1860 / 1880
Videojet E15008: Viscometer Empty Time Too Long
Quick answer
Videojet E15008 means The viscometer failed to empty in time, so viscosity cannot be monitored..
What it means
The viscometer failed to empty in time, so viscosity cannot be monitored..
This page is generated from a public source (see below). It is a starting point, not a substitute for the service manual for your exact model and serial number.
Likely causes
- Clogged viscometer drain
- Thick ink
- Blocked vent cross-connect
- Valve leaking
- Low-level probe fault
- Defective IMB
What to check
- Contact your local Videojet Service representative
Parts and consumables
Parts
- viscometer
- valve
- ink management board
Consumables
- ink
FAQ
What does Videojet E15008 mean?
Videojet E15008 (Viscometer Empty Time Too Long) means: The viscometer failed to empty in time, so viscosity cannot be monitored.
What should I check first for Videojet E15008?
Start with: Contact your local Videojet Service representative.
When should I call a technician for Videojet E15008?
If the checks above do not clear the code, or the fault involves a board, pump, valve, heater, or EHT/HV component, stop and call a qualified technician. Do not keep a production line running on an unresolved fault.
Source: https://cdn.pimber.ly/public/asset/raw/604204e33fc1d2001bbaeea6/d48fefc9/62b5db2d2d2f5f4727000086/E12907_1.pdf — p. 9-13 “(E15008) Viscometer Empty Time Too Long”.
Provenance tier: manual. Confidence: high. Diagnostic guidance only — always verify against the manual for your exact model.