Videojet 1580 / 1860 / 1880
Videojet E15007: Viscometer Fill Time Too Long
Quick answer
Videojet E15007 means The viscometer failed to fill in time, so viscosity cannot be monitored..
What it means
The viscometer failed to fill in time, so viscosity cannot be monitored..
This page is generated from a public source (see below). It is a starting point, not a substitute for the service manual for your exact model and serial number.
Likely causes
- Clogged viscometer restrictor
- High-level probe fault
- Valve fault
- Blocked vent
- Defective IMB
What to check
- Run a hardware self-test on the ink system components
Parts and consumables
Parts
- viscometer
- valve
- ink management board
Consumables
- ink
FAQ
What does Videojet E15007 mean?
Videojet E15007 (Viscometer Fill Time Too Long) means: The viscometer failed to fill in time, so viscosity cannot be monitored.
What should I check first for Videojet E15007?
Start with: Run a hardware self-test on the ink system components.
When should I call a technician for Videojet E15007?
If the checks above do not clear the code, or the fault involves a board, pump, valve, heater, or EHT/HV component, stop and call a qualified technician. Do not keep a production line running on an unresolved fault.
Source: https://cdn.pimber.ly/public/asset/raw/604204e33fc1d2001bbaeea6/d48fefc9/62b5db2d2d2f5f4727000086/E12907_1.pdf — p. 9-13 “(E15007) Viscometer Fill Time Too Long”.
Provenance tier: manual. Confidence: high. Diagnostic guidance only — always verify against the manual for your exact model.