Videojet 1580 / 1860 / 1880

Videojet E15005: Ink Pump Fault

Videojet manual Checked 2026-11-21
Quick answer Videojet E15005 means The ink pump generated insufficient pressure at maximum drive..

What it means

The ink pump generated insufficient pressure at maximum drive..

This page is generated from a public source (see below). It is a starting point, not a substitute for the service manual for your exact model and serial number.

Likely causes

  • Ink leak
  • Loose pump or transducer connection
  • Defective pressure transducer, pump or IMB

What to check

  1. Switch off and inspect the ink compartment for leaks

Parts and consumables

Parts

  • ink pump
  • pressure transducer
  • ink management board

Consumables

  • ink

FAQ

What does Videojet E15005 mean?

Videojet E15005 (Ink Pump Fault) means: The ink pump generated insufficient pressure at maximum drive.

What should I check first for Videojet E15005?

Start with: Switch off and inspect the ink compartment for leaks.

When should I call a technician for Videojet E15005?

If the checks above do not clear the code, or the fault involves a board, pump, valve, heater, or EHT/HV component, stop and call a qualified technician. Do not keep a production line running on an unresolved fault.

Source: https://cdn.pimber.ly/public/asset/raw/604204e33fc1d2001bbaeea6/d48fefc9/62b5db2d2d2f5f4727000086/E12907_1.pdf — p. 9-13 “(E15005) Ink Pump Fault”. Provenance tier: manual. Confidence: high. Diagnostic guidance only — always verify against the manual for your exact model.