Videojet 1580 / 1860 / 1880
Videojet E10738: Resident Flash Failure
Quick answer
Videojet E10738 means The main control board cannot communicate with the microSD card..
What it means
The main control board cannot communicate with the microSD card..
This page is generated from a public source (see below). It is a starting point, not a substitute for the service manual for your exact model and serial number.
Likely causes
- MicroSD card not seated
- Flash failure
What to check
- Remove and re-insert the microSD card and power-cycle
- Contact Videojet Service if the alarm stays
Parts and consumables
Parts
- microSD card
- main control board
Consumables
- Not listed in the source.
FAQ
What does Videojet E10738 mean?
Videojet E10738 (Resident Flash Failure) means: The main control board cannot communicate with the microSD card.
What should I check first for Videojet E10738?
Start with: Remove and re-insert the microSD card and power-cycle. Then: Contact Videojet Service if the alarm stays.
When should I call a technician for Videojet E10738?
If the checks above do not clear the code, or the fault involves a board, pump, valve, heater, or EHT/HV component, stop and call a qualified technician. Do not keep a production line running on an unresolved fault.
Source: https://cdn.pimber.ly/public/asset/raw/604204e33fc1d2001bbaeea6/d48fefc9/62b5db2d2d2f5f4727000086/E12907_1.pdf — p. 9-9 “(E10738) Resident Flash Failure”.
Provenance tier: manual. Confidence: high. Diagnostic guidance only — always verify against the manual for your exact model.