Videojet 1580 / 1860 / 1880

Videojet E10671: Ink System Valve Current Offset Out of Range

Videojet manual Checked 2026-11-21
Quick answer Videojet E10671 means The ink-system valve current offset measured at start-up is outside tolerance..

What it means

The ink-system valve current offset measured at start-up is outside tolerance..

This page is generated from a public source (see below). It is a starting point, not a substitute for the service manual for your exact model and serial number.

Likely causes

  • Erroneous offset calculated at boot
  • Environmental extreme
  • Short in one or more valves
  • Defective IMB

What to check

  1. Power-cycle to reset the offset
  2. Run a hardware self-test or valve test

Parts and consumables

Parts

  • ink system valves
  • ink management board

Consumables

  • ink

FAQ

What does Videojet E10671 mean?

Videojet E10671 (Ink System Valve Current Offset Out of Range) means: The ink-system valve current offset measured at start-up is outside tolerance.

What should I check first for Videojet E10671?

Start with: Power-cycle to reset the offset. Then: Run a hardware self-test or valve test.

When should I call a technician for Videojet E10671?

If the checks above do not clear the code, or the fault involves a board, pump, valve, heater, or EHT/HV component, stop and call a qualified technician. Do not keep a production line running on an unresolved fault.

Source: https://cdn.pimber.ly/public/asset/raw/604204e33fc1d2001bbaeea6/d48fefc9/62b5db2d2d2f5f4727000086/E12907_1.pdf — p. 9-7 “(E10671) Ink System Valve Current Offset Out of Range”. Provenance tier: manual. Confidence: high. Diagnostic guidance only — always verify against the manual for your exact model.