Videojet 1580 / 1860 / 1880

Videojet E10639: IMB Fluid Data Incompatible With Nozzle Size

Videojet manual Checked 2026-11-21
Quick answer Videojet E10639 means The fluid data in the IMB does not match the print module nozzle size..

What it means

The fluid data in the IMB does not match the print module nozzle size..

This page is generated from a public source (see below). It is a starting point, not a substitute for the service manual for your exact model and serial number.

Likely causes

  • IMB fluid data and print module nozzle size mismatch

What to check

  1. Update the fluid data on the IMB, or fit a print module of the correct nozzle size

Parts and consumables

Parts

  • ink management board
  • print module

Consumables

  • ink

FAQ

What does Videojet E10639 mean?

Videojet E10639 (IMB Fluid Data Incompatible With Nozzle Size) means: The fluid data in the IMB does not match the print module nozzle size.

What should I check first for Videojet E10639?

Start with: Update the fluid data on the IMB, or fit a print module of the correct nozzle size.

When should I call a technician for Videojet E10639?

If the checks above do not clear the code, or the fault involves a board, pump, valve, heater, or EHT/HV component, stop and call a qualified technician. Do not keep a production line running on an unresolved fault.

Source: https://cdn.pimber.ly/public/asset/raw/604204e33fc1d2001bbaeea6/d48fefc9/62b5db2d2d2f5f4727000086/E12907_1.pdf — p. 9-6 “(E10639) IMB Fluid Data Incompatible With Nozzle Size”. Provenance tier: manual. Confidence: high. Diagnostic guidance only — always verify against the manual for your exact model.