Videojet 1620 / 1520 / 1220

Videojet Bad Phasing: Bad Phasing

Videojet third-party source Checked 2026-11-21
Quick answer Videojet Bad Phasing means Phase data cannot be obtained during jet start-up; the printer cannot print reliably without it..

What it means

Phase data cannot be obtained during jet start-up; the printer cannot print reliably without it..

This page is generated from a public source (see below). It is a starting point, not a substitute for the service manual for your exact model and serial number.

Likely causes

  • Dirty or wet printhead
  • Partly blocked nozzle or poor break-up

What to check

  1. Clean the printhead and dry it completely
  2. Back-flush the nozzle and check break-up
  3. Call a Videojet service engineer if it returns

Parts and consumables

Parts

  • printhead
  • nozzle

Consumables

  • cleaning solution

FAQ

What does Videojet Bad Phasing mean?

Videojet Bad Phasing (Bad Phasing) means: Phase data cannot be obtained during jet start-up; the printer cannot print reliably without it.

What should I check first for Videojet Bad Phasing?

Start with: Clean the printhead and dry it completely. Then: Back-flush the nozzle and check break-up. Then: Call a Videojet service engineer if it returns.

When should I call a technician for Videojet Bad Phasing?

If the code returns after the checks above, or the printer develops a new fault, call a qualified technician.

Source: https://oeelab.com/videojet-printer-fault-codes — § Bad Phasing: Bad Phasing “Bad Phasing: Bad Phasing”. Provenance tier: third-party source, not verified against the manufacturer manual. Confidence: low. Diagnostic guidance only — always verify against the manual for your exact model.