Domino A-Series (A100 / A200 / A300 / A400)

Domino Viscometer fault: Viscometer fault

Domino manual Checked 2026-11-21
Quick answer Domino Viscometer fault means The viscometer or its control valve has failed, so viscosity can no longer be measured reliably..

What it means

The viscometer or its control valve has failed, so viscosity can no longer be measured reliably..

This page is generated from a public source (see below). It is a starting point, not a substitute for the service manual for your exact model and serial number.

Likely causes

  • Viscometer failed
  • Viscometer valve failed

What to check

  1. Check the connections
  2. Replace the viscometer or valve

Parts and consumables

Parts

  • viscometer
  • viscometer valve

Consumables

  • ink

FAQ

What does Domino Viscometer fault mean?

Domino Viscometer fault (Viscometer fault) means: The viscometer or its control valve has failed, so viscosity can no longer be measured reliably.

What should I check first for Domino Viscometer fault?

Start with: Check the connections. Then: Replace the viscometer or valve.

When should I call a technician for Domino Viscometer fault?

If the checks above do not clear the code, or the fault involves a board, pump, valve, heater, or EHT/HV component, stop and call a qualified technician. Do not keep a production line running on an unresolved fault.

Source: http://marking.com.ua/INSTRUKCII/MANUAL%20PRINTERA/Domino%20A-Series%20Operation%20and%20Maintenance%20Manual%20.pdf — p. 4--13 “Viscometer fault”. Provenance tier: manual. Confidence: high. Diagnostic guidance only — always verify against the manual for your exact model.