Domino A-Series (A100 / A200 / A300 / A400)

Domino Ink pressure loss: Ink pressure loss

Domino manual Checked 2026-11-21
Quick answer Domino Ink pressure loss means Pressure has been lost through a leak, pump failure or transducer failure..

What it means

Pressure has been lost through a leak, pump failure or transducer failure..

This page is generated from a public source (see below). It is a starting point, not a substitute for the service manual for your exact model and serial number.

Likely causes

  • Leak in the ink system
  • Pump failure
  • Transducer failure

What to check

  1. Check for leaks
  2. Check the electrical connections, pump and transducer

Parts and consumables

Parts

  • ink pump
  • pressure transducer

Consumables

  • ink

FAQ

What does Domino Ink pressure loss mean?

Domino Ink pressure loss (Ink pressure loss) means: Pressure has been lost through a leak, pump failure or transducer failure.

What should I check first for Domino Ink pressure loss?

Start with: Check for leaks. Then: Check the electrical connections, pump and transducer.

When should I call a technician for Domino Ink pressure loss?

If the checks above do not clear the code, or the fault involves a board, pump, valve, heater, or EHT/HV component, stop and call a qualified technician. Do not keep a production line running on an unresolved fault.

Source: http://marking.com.ua/INSTRUKCII/MANUAL%20PRINTERA/Domino%20A-Series%20Operation%20and%20Maintenance%20Manual%20.pdf — p. 4--9 “Ink pressure loss”. Provenance tier: manual. Confidence: high. Diagnostic guidance only — always verify against the manual for your exact model.