Domino A-Series (A100 / A200 / A300 / A400)

Domino Fall-back jet modulation in use: Fall-back jet modulation in use

Domino manual Checked 2026-11-21
Quick answer Domino Fall-back jet modulation in use means Auto modulation could not be determined at start-up, so the last good value is being used..

What it means

Auto modulation could not be determined at start-up, so the last good value is being used..

This page is generated from a public source (see below). It is a starting point, not a substitute for the service manual for your exact model and serial number.

Likely causes

  • Charge electrode needs cleaning
  • Modulation could not be determined automatically

What to check

  1. Clean the charge electrode if needed
  2. Check print quality
  3. Call Domino Service if the fault stays

Parts and consumables

Parts

  • charge electrode

Consumables

  • cleaning solution

FAQ

What does Domino Fall-back jet modulation in use mean?

Domino Fall-back jet modulation in use (Fall-back jet modulation in use) means: Auto modulation could not be determined at start-up, so the last good value is being used.

What should I check first for Domino Fall-back jet modulation in use?

Start with: Clean the charge electrode if needed. Then: Check print quality. Then: Call Domino Service if the fault stays.

When should I call a technician for Domino Fall-back jet modulation in use?

If the code returns after the checks above, or the printer develops a new fault, call a qualified technician.

Source: http://marking.com.ua/INSTRUKCII/MANUAL%20PRINTERA/Domino%20A-Series%20Operation%20and%20Maintenance%20Manual%20.pdf — p. 4--7 “Fall--back jet modulation in use”. Provenance tier: manual. Confidence: high. Diagnostic guidance only — always verify against the manual for your exact model.