Domino A-Series (A100 / A200 / A300 / A400)
Domino Excess pump underspeed: Excess pump underspeed
Quick answer
Domino Excess pump underspeed means Pressure is held, but the pump is running slower than it should..
What it means
Pressure is held, but the pump is running slower than it should..
This page is generated from a public source (see below). It is a starting point, not a substitute for the service manual for your exact model and serial number.
Likely causes
- Blockage in the ink system
- Kinked tube
- Badly formed connection
What to check
- Check the ink system for blockages, kinked tubes and poor connections
Parts and consumables
Parts
- ink pump
- ink tubes
Consumables
- ink
FAQ
What does Domino Excess pump underspeed mean?
Domino Excess pump underspeed (Excess pump underspeed) means: Pressure is held, but the pump is running slower than it should.
What should I check first for Domino Excess pump underspeed?
Start with: Check the ink system for blockages, kinked tubes and poor connections.
When should I call a technician for Domino Excess pump underspeed?
If the checks above do not clear the code, or the fault involves a board, pump, valve, heater, or EHT/HV component, stop and call a qualified technician. Do not keep a production line running on an unresolved fault.
Source: http://marking.com.ua/INSTRUKCII/MANUAL%20PRINTERA/Domino%20A-Series%20Operation%20and%20Maintenance%20Manual%20.pdf — p. 4--6 “Excess pump underspeed”.
Provenance tier: manual. Confidence: high. Diagnostic guidance only — always verify against the manual for your exact model.