Domino A-Series (A100 / A200 / A300 / A400)
Domino Excess pump overspeed: Excess pump overspeed
Quick answer
Domino Excess pump overspeed means Pressure is held, but the pump is running faster than it should..
What it means
Pressure is held, but the pump is running faster than it should..
This page is generated from a public source (see below). It is a starting point, not a substitute for the service manual for your exact model and serial number.
Likely causes
- Ink system leak
- Worn pump
What to check
- Check the ink system for leaks
- Check for a worn pump
Parts and consumables
Parts
- ink pump
Consumables
- ink
FAQ
What does Domino Excess pump overspeed mean?
Domino Excess pump overspeed (Excess pump overspeed) means: Pressure is held, but the pump is running faster than it should.
What should I check first for Domino Excess pump overspeed?
Start with: Check the ink system for leaks. Then: Check for a worn pump.
When should I call a technician for Domino Excess pump overspeed?
If the checks above do not clear the code, or the fault involves a board, pump, valve, heater, or EHT/HV component, stop and call a qualified technician. Do not keep a production line running on an unresolved fault.
Source: http://marking.com.ua/INSTRUKCII/MANUAL%20PRINTERA/Domino%20A-Series%20Operation%20and%20Maintenance%20Manual%20.pdf — p. 4--6 “Excess pump overspeed”.
Provenance tier: manual. Confidence: high. Diagnostic guidance only — always verify against the manual for your exact model.