Domino A-Series (A100 / A200 / A300 / A400)

Domino Charge detection has failed: Charge detection has failed

Domino manual Checked 2026-11-21
Quick answer Domino Charge detection has failed means The printer cannot confirm correct charge-electrode modulation..

What it means

The printer cannot confirm correct charge-electrode modulation..

This page is generated from a public source (see below). It is a starting point, not a substitute for the service manual for your exact model and serial number.

Likely causes

  • Modulation set incorrectly
  • Ink or solvent on the charge electrode

What to check

  1. Reset modulation
  2. Clean and check the charge electrode

Parts and consumables

Parts

  • charge electrode

Consumables

  • cleaning solution

FAQ

What does Domino Charge detection has failed mean?

Domino Charge detection has failed (Charge detection has failed) means: The printer cannot confirm correct charge-electrode modulation.

What should I check first for Domino Charge detection has failed?

Start with: Reset modulation. Then: Clean and check the charge electrode.

When should I call a technician for Domino Charge detection has failed?

If the code returns after the checks above, or the printer develops a new fault, call a qualified technician.

Source: http://marking.com.ua/INSTRUKCII/MANUAL%20PRINTERA/Domino%20A-Series%20Operation%20and%20Maintenance%20Manual%20.pdf — p. 4--5 “Charge detection has failed”. Provenance tier: manual. Confidence: high. Diagnostic guidance only — always verify against the manual for your exact model.