Domino A-Series (A100 / A200 / A300 / A400)

Domino Abnormal vacuum level: Abnormal vacuum level

Domino manual Checked 2026-11-21
Quick answer Domino Abnormal vacuum level means Jet-pump flow is wrong: either low flow at low pump speed, or flow with the pump running at high speed..

What it means

Jet-pump flow is wrong: either low flow at low pump speed, or flow with the pump running at high speed..

This page is generated from a public source (see below). It is a starting point, not a substitute for the service manual for your exact model and serial number.

Likely causes

  • Ink leakage in the feed circuit
  • Partial blockage in the feed circuit or jet pump
  • Air drawn into the feed circuit

What to check

  1. Look for and stop any ink leakage
  2. Check for a partial blockage in the feed circuit or jet pump
  3. Check for air leaking into the feed circuit

Parts and consumables

Parts

  • jet pump
  • feed circuit

Consumables

  • ink

FAQ

What does Domino Abnormal vacuum level mean?

Domino Abnormal vacuum level (Abnormal vacuum level) means: Jet-pump flow is wrong: either low flow at low pump speed, or flow with the pump running at high speed.

What should I check first for Domino Abnormal vacuum level?

Start with: Look for and stop any ink leakage. Then: Check for a partial blockage in the feed circuit or jet pump. Then: Check for air leaking into the feed circuit.

When should I call a technician for Domino Abnormal vacuum level?

If the checks above do not clear the code, or the fault involves a board, pump, valve, heater, or EHT/HV component, stop and call a qualified technician. Do not keep a production line running on an unresolved fault.

Source: http://marking.com.ua/INSTRUKCII/MANUAL%20PRINTERA/Domino%20A-Series%20Operation%20and%20Maintenance%20Manual%20.pdf — p. 4--5 “Abnormal vacuum level”. Provenance tier: manual. Confidence: high. Diagnostic guidance only — always verify against the manual for your exact model.