# Videojet E6047: Ink Viscosity Too Low

**Series:** Videojet 1650 / 1650 UHS / 1550  \
**Source tier:** manual  \
**Confidence:** high  \
**Citation:** p. 7-15 — "Ink Viscosity Too Low"  \
**Last checked:** 2026-11-21

## What it means

The ink is too thin (pressure more than 0.1 bar below the calculated value).

## Likely causes

- Too much make-up added, e.g. repeated start/stop cycles
- Ink system fault

## What to check

- Avoid repeated jet start/stop cycles that add make-up
- Use the service manual or call a Videojet service engineer

## Parts

- Not listed in the source.

## Consumables

- make-up fluid
- ink

## Source

- https://www.videojet.com/wp-content/uploads/dam/Countries/North%20America/Operator-Manuals/CIJ/1650-Operator-Manual.pdf

> Diagnostic guidance only. Verify against the service manual for your exact model and serial number. This page is independent and unofficial.
