# Videojet E6046: Ink Viscosity Too High

**Series:** Videojet 1650 / 1650 UHS / 1550  \
**Source tier:** manual  \
**Confidence:** high  \
**Citation:** p. 7-15 — "Ink Viscosity Too High"  \
**Last checked:** 2026-11-21

## What it means

The ink is too thick (pressure more than 0.1 bar above the calculated value).

## Likely causes

- Solvent lost from the ink and not replaced
- Make-up cartridge empty or missing

## What to check

- Check a make-up cartridge is fitted and not empty
- Use the service manual or call a Videojet engineer if it stays

## Parts

- make-up cartridge

## Consumables

- make-up fluid
- ink

## Source

- https://www.videojet.com/wp-content/uploads/dam/Countries/North%20America/Operator-Manuals/CIJ/1650-Operator-Manual.pdf

> Diagnostic guidance only. Verify against the service manual for your exact model and serial number. This page is independent and unofficial.
