# Videojet E6029: EHT/HV Calibration Required

**Series:** Videojet 1650 / 1650 UHS / 1550  \
**Source tier:** manual  \
**Confidence:** high  \
**Citation:** p. 7-13 — "EHT/HV Calibration Required"  \
**Last checked:** 2026-11-21

## What it means

The printer needs an EHT/HV calibration before it can run correctly.

## Likely causes

- Calibration lost or not done (e.g. after a part change)

## What to check

- Check the printhead is clean and completely dry
- Check the printhead sleeve is in place and secured
- Calibrate EHT/HV or call a Videojet engineer

## Parts

- printhead
- printhead sleeve

## Consumables

- Not listed in the source.

## Safety

EHT (extra-high tension) is present in the printhead; ensure it is clean and dry and the sleeve is secure before calibration.

## Source

- https://www.videojet.com/wp-content/uploads/dam/Countries/North%20America/Operator-Manuals/CIJ/1650-Operator-Manual.pdf

> Diagnostic guidance only. Verify against the service manual for your exact model and serial number. This page is independent and unofficial.
