# Videojet E6008: EHT/HV Trip

**Series:** Videojet 1650 / 1650 UHS / 1550  \
**Source tier:** manual  \
**Confidence:** high  \
**Citation:** p. 7-11 — "EHT/HV Trip"  \
**Last checked:** 2026-11-21

## What it means

The printer sensed arcing at the deflector plate (EHT leakage above the limit) and stopped printing.

## Likely causes

- Ink build-up or wet ink on the deflector plate or charge electrode
- Printhead not fully dry at jet start
- Blocked nozzle or misaligned jet
- EHT/HV calibration out of date

## What to check

- Stop the jet and clean the deflector electrodes with the correct cleaning solution
- Let the printhead dry fully before restarting
- Back-flush the nozzle
- Calibrate EHT/HV if the trip returns

## Parts

- deflector plate
- charge electrode
- nozzle

## Consumables

- cleaning solution

## Safety

EHT (extra-high tension) is present in the printhead. Stop the jet and switch off hazardous voltages before cleaning; let the printhead dry fully before restart.

## Source

- https://www.videojet.com/wp-content/uploads/dam/Countries/North%20America/Operator-Manuals/CIJ/1650-Operator-Manual.pdf

> Diagnostic guidance only. Verify against the service manual for your exact model and serial number. This page is independent and unofficial.
